CMM Probe Heads

Showing 1–24 of 96 results

Interfaces (2)
Motorized Probe Head Accessories (5)
Probe Accessories (7)
Probe Cables (23)
Probe Extensions & Etc (12)
Probe Head Shanks (30)
Probe Heads Manual (4)
Probe Heads Motorized (3)
Racks (10)
Touch Probes (6)
100mm Leg for ACR1 Autochange Rack
$18.00
For use with ACR1 Autochange Rack to extend rack capacity for long extensions. Sold Each.

A-1051-0147
200mm Leg for Autochange Rack
$30.00
For use with ACR1 Autochange Rack to extend rack capacity for long extensions. Sold Each.

A-1051-0148
932878 Mitutoyo CMM Probe Head Cable

177″ Plain Shielded Cable 5 Pin DIN Male 5 Pin Mitutoyo Fits Mitutoyo CMM

A-1016-7562
ACC2-3 Autochange Controller Unit
$3,741.00
Autochange controller unit for automatic probe change operation.

A-1520-0100
AM1 Adjustment Module
$987.00
Adjust alignment of PH9, PH10, MIH or TP6M Probe Head to the CMM quill. Adjustments for Pitch, Yaw and Roll.

A-1026-0320
AM2 Adjustment Module
$987.00
Adjust alignment of PH10MQ/MQH Probe
Head to the CMM quill.

Adjustments for Pitch, Yaw and Roll.

A-1036-0080
Autochange Adjustable Rack Base Only
$399.00
For use with ACR1 Autochange Rack

A-1051-0440
Autochange Rack Mounting Kit
$1,354.00
Includes:

(1) Adjustable Rack Base
(2) 200mm Legs
(2) Screws

A-1051-0441
ACR1 Autochange Rack System
$24,055.00
Eight Station Rack for interfacing with Autojoint compatible probes, heads and extensions. Requires ACC2 controller, cables and mounting kit

A-1051-4000
HCU2 Probe Hand Control Unit
$968.00
A portable head drive and position display unit for use with PHC50 and PHC10-2 motorised head controllers.

A-5882-0010
Manual Autojoint Probe Stand

Low cost rack for storing up to six combinations of probes, extension bars and accessories. Can be mounted on a wall or the CMM table.

A-1071-0001
Manual MSR1 Rack

The MSR1 rack is intende for us eon either manual or DCC CMMs to hold pre-qualified stylus assemblies fitted to TP20 or TP200 probe modules. Provides convenient storage and protects the kinematic coupling mechanism from contamination.

A-1371-0347
Sale!
MCR20 Stylus Changing Rack System
Original price was: $6,655.00.Current price is: $6,334.00.
Automatically change styli on your CMM within a program Using the TP20 Probe. No wires, interfaces or special programming required. Includes 2 Stylus Modules

A-1371-0261
MIP-RBE (Call for Options)

MIP Repair By Exchange (RBE)* Obsolete.
* Please call for probe upgrade options MH20i or MH8 with TP20.

Matt – 847-286-9953
MS1 Probe Head Shank
$190.00
For TP1, MIP, MH8, PH5, PH9, PH10 and PH6M Probe Heads. Fits Brown & Sharpe, Bridgeport, ELM, Fanamation, Giddings & Lewis/Sheffield, Poli & Portage CMM’s.

M-1041-2146
MS1/T Probe Head Shank
$270.00
For PH6 and PH6A Probe Heads. Fits Brown & Sharpe, Bridgeport, ELM, Fanamation, Giddings & Lewis/Sheffield, Poli & Portage CMM’s.

M-1046-1121
MS10 Probe Head Shank
$190.00
For TP1, MIP, MH8, PH5, PH9, PH10 and PH6M Probe Heads. Fits Mitutoyo CMM’s

M-1041-7507
MS11 Probe Head Shank
$145.00
For TP1, MIP, MH8, PH5, PH9, PH10 and PH6M Probe Heads. Fits Crown Windley CMM’s.

M-1041-1088
MS11/T Probe Head Shank
$145.00
For PH6 and PH6A Probe Heads. Fits Crown & Windley CMM’s.

M-1046-2661
MS12 Probe Head Shank
$145.00
For TP1, MIP, MH8, PH5, PH9, PH10 and
PH6M Probe Heads. Fits Mitutoyo (new
specification) CMM’s.

M-1041-5348
MS13 Probe Head Shank
$145.00
For TP1, MIP, MH8, PH5, PH9, PH10 and
PH6M Probe Heads. Fits DEA CMM’s.
Special Version with in-shank connector
for MIH-D and MIP-D.

M-1041-5349
MS14 Probe Head Shank
$145.00
For TP1, MIP, MH8, PH5, PH9, PH10 and
PH6M Probe Heads. Fits CTA and Real
Meca CMM’s.

M-1041-5981
MS17 Probe Head Shank
$207.00
For TP1, MIP, MH8, PH5, PH9, PH10 and
PH6M Probe Heads. Fits Steifelmayer
CMM’s.

M-1041-7113
MS2 Probe Head Shank
$145.00
For TP1, MIP, MH8, PH5, PH9, PH10 and
PH6M Probe Heads. Fits Boice, Zeiss,
Federal, Helmel, Kemco, Metrologic, MFO,
Mora, Starrett, Boecki and Numerix CMM’s.

M-1041-1650