• Call Us Toll-Free: (800) 648-6944

Ready to invest in a CMM? Then let CMM Technology put our more than 25 years of cmm experience to work for you! We can put together the right CMM, Probe System, and Inspection Software that is required for your particular application, at a fraction of the cost of a new CMM.

Further, we offer the same warranty as a new coordinate measuring machine. A full 12 months! As the largest independent service company for cmm’s we know all of the details of each manufacturer and each of their models. Because of this intimate knowledge, we may not have the most expansive selection of used cmm’s, but we undoubtedly have the best selection. From servicing these machine for over 25 years, we know which models to avoid and which to stock, so you can trust that all of our used cmm’s are the best in the business. From Brown and Sharpe to Mitutoyo, from Sheffield to Starrett to Zeiss, CMM Technology has the expertise necessary to direct you to the most appropriate CMM for your particular needs and goals.

Your used certified CMM is shipped with your chosen CMM probing system and CMM software. As a special incentive, we set up your CMM and perform a complete calibration. We then train you at your plant, using your CMM, on your parts. All of this is included at no extra cost!

And what about our prices? Again, we’ve been in business for more than 25 years, and we want to serve your cmm needs both now and well into the future. Therefore, our biggest concern is in building a long-term relationship with you and your company. Our rock bottom prices help us to initiate that relationship.

So give us a call today, and let us help you to find the most affordable and efficient used cmm for your company.

 

All our Certified Manual CMM’s are subject to prior sale.

  • Numerex GS2424-18 Manual CMM

    CMM Type:Manual Bridge Model
    Travel Range:X = 24” (600mm), Y = 24” (600mm) Z = 18” (450mm)
    Footprint:W = 48” (1220mm) L = 49” (1245mm) H = 92” (2337mm)
    Total Weight:2150Lbs (975 KG) – CMM and Stand
    Accuracy:Repeatability: 2.5μm Linear Accuracy (μm): 3.5 + 3L / 1000
    Interface:IM USB Scale and Probe Interface Unit
    Software:Nikon’ CMM Manager Lite or Standard Version Software
    Probe System:Choice of any Renishaw Manual Probe – Recommended MH20i, or PH1/TP20
    CMM Options:Fixturing Plates, Fixture Rail, Video Probe*, True Position Locators
    *Systems may require additional controller hardware and or software
  • Brown & Sharpe Microval 343 Manual CMM

    CMM Type:Manual Bridge Model
    Travel Range:X = 12” (300mm), Y = 16” (400mm) Z = 12” (300mm)
    Footprint:W = 29” (737mm) L = 30” (762mm) H = 86” (2185mm)
    Total Weight:550Lbs (250 KG) – CMM and Stand
    Accuracy:Repeatability: 3μm Linear Accuracy (μm): 3.5 + 4L / 1000
    Interface:IM USB Scale and Probe Interface Unit
    Software:Nikon’ CMM Manager Lite or Standard Version Software
    Probe System:Choice of any Renishaw Manual Probe – Recommended MH20i, or PH1/TP20
    CMM Options:Fixturing Plates, Fixture Rail, Video Probe*, True Position Locators
    *Systems may require additional controller hardware and or software
  • Mitutoyo B-706 Manual CMM

    CMM Type:Manual Bridge Model
    Travel Range:X = 24” (600mm), Y = 28” (700mm) Z = 18” (450mm)
    Footprint:W = 50” (1270mm) L = 52” (1321mm) H = 98” (2489mm)
    Total Weight:2600Lbs (1179 KG) - CMM and Stand
    Accuracy:Repeatability: 2.5μm Linear Accuracy (μm): 4.5 + 4L / 1000
    Interface:IM USB Scale and Probe Interface Unit
    Software:Nikon’ CMM Manager Lite or Standard Version Software
    Probe System:Choice of any Renishaw Manual Probe – Recommended MH20i, or PH1/TP20
    CMM Options:Fixturing Plates, Fixture Rail, Video Probe*, True Position Locators
    *Systems may require additional controller hardware and or software
  • Mitutoyo AE-122 Manual CMM

    CMM Type:Manual Gantry Model
    Travel Range:X = 20” (500mm), Y = 18” (450mm) Z = 12” (300mm)
    Footprint:W = 37” (940mm) L = 31” (790mm) H = 60” (1525mm)
    Total Weight:1200Lbs (545 KG) - CMM and Stand
    Accuracy:Repeatability: 2.5μm Linear Accuracy (μm): 3.0 + 3L / 1000
    Interface:IM USB Scale and Probe Interface Unit
    Software:Nikon’ CMM Manager Lite or Standard Version Software
    Probe System:Choice of any Renishaw Manual Probe – Recommended MH20i, or PH1/TP20
    CMM Options:Fixturing Plates, Fixture Rail, Video Probe*, True Position Locators
    *Systems may require additional controller hardware and or software
  • Mitutoyo B-241 Manual CMM

    CMM Type:Manual Bridge Model
    Travel Range:X = 28” (700mm), Y = 40” (1000mm) Z = 18” (450mm)
    Footprint:W = 52” (1320mm) L = 60” (1525mm) H = 97” (2465mm)
    Total Weight:4050Lbs (1837 KG) - CMM and Stand
    Accuracy:Repeatability: 2.5μm Linear Accuracy (μm): 4+ 3L / 1000
    Interface:IM USB Scale and Probe Interface Unit
    Software:Nikon’ CMM Manager Lite or Standard Version Software
    Probe System:Choice of any Renishaw Manual Probe – Recommended MH20i, or PH1/TP20
    CMM Options:Fixturing Plates, Fixture Rail, Video Probe*, True Position Locators
    *Systems may require additional controller hardware and or software
  • Mitutoyo Bright M507 Manual CMM

    CMM Type:Manual Bridge Model
    Travel Range:X = 20” (500mm), Y = 28” (700mm) Z = 16” (400mm)
    Footprint:W = 43” (1092mm) L = 49” (1244mm) H = 88” (2235mm)
    Total Weight:1240Lbs (563 KG) - CMM and Stand
    Accuracy:Repeatability: 2.5μm Linear Accuracy (μm): 3.0 + 4L / 1000
    Interface:IM USB Scale and Probe Interface Unit
    Software:Nikon’ CMM Manager Lite or Standard Version Software
    Probe System:Choice of any Renishaw Manual Probe – Recommended MH20i, or PH1/TP20
    CMM Options:Fixturing Plates, Fixture Rail, Video Probe*, True Position Locators
    *Systems may require additional controller hardware and or software