-
CMM REFRIGERATED DRYERS
RTI Model RD 0020 Refrigerated Dryer
$ 3,550 Complete – Add Shipping
SPECIFICATIONS:
Model: RTI Model RD 0020
Airflow: 20 SCFM
Power: 115 V
Fitting: 1/2 NPT
Size: 21″ x 12″ x 20″ 80 Lbs
Drain: Electronic Timer DrainFEATURES:
- 20 scfm to 2000 scfm ½” to 4″ units
- Energy efficient cycling control system saves 30-80% over a non-cycling dryer
- Cycling prevents freezing of the heat exchanger dyring off peak operation
- Unit maintains a constant 38°F dew point at the outlet, despite inlet flow and temperature variations
- Accepts air inlet temperatures up to 158°F and inlet pressures up to 230 psi
- Compact design minimizes floor space needed to install dryer
- Suitable for most Manual and DCC CMMs.
- Larger Units are available to accommodate larger volume of airflow on larger CMMs.
- Filter / Regulator Kits & Membrane Dryers are available also.
Model RDC -10 Refrigerated Dryer
$ 2,750 Complete – ADD Shipping
SPECIFICATIONS:Model: RDC -10
Airflow: 10 SCFM
Power: 115 V
Fitting: 3/8 NPT
Size: 12″ x 14″ x 17″ 46 Lbs.
Drain: Electronic Timer DrainFEATURES:
- Aluminum Cooling Technology
- Fan Pressure Switch
- Hot Gas Bypass Valve
- Oversized Condensers
- Compact and Quiet
- Easy Installation
- R134a Refrigerant
Suitable for most Manual and DCC CMMs. Larger Units are available to accommodate larger volume of airflow on larger CMMs. Filter / Regulator Kits & Membrane Dryers are available also.
-
CMM FILTER / REGULATOR KITS
“Best” CMM Filter / Regulator Kit
$ 735 Complete – Add Shipping
Stage 1 Filter – Inverse Flow Technology Water & Contaminant Removal
Stainless Mesh / Friction Dryer / Active Carbon Filter down to 0.003 PPMStage 2 Filter – Grade 1 Coalescing unit 0.01 Micron. Highest grade available on a scale of 1-12 for Industry available Coalescing Units
Regulator – Pressure Gage – Dial, 0-160 PSI (0 -11 MPa)
Pre Assembled / Includes Mounting Bracket for CMM Stand
*Suitable for All Manual and DCC CMMs. Can handle up to 60 SCFM. Refrigerated Air dryers or Membrane Dryers are available also. Please call for more info.
-
CMM FILTER / REGULATOR KITS
$ 425 Complete – Add Shipping
Water Separator Unit – ¼ NPT In, 99% Water Removal, Auto Drain
Filter / Regulator – ¼ NPT, Filter Rating 5µ, Auto Drain
Pressure Gage – Dial, 0-160 PSI (0 -11 MPa)
Sub Micron Filter – ¼ NPT Out, Filter Rating 0.01µ, Auto Drain
Pre Assembled / Includes Mounting Bracket for CMM Stand
*Suitable for most Manual and DCC CMMs. Can be customized to accommodate larger volume of airflow on larger CMMs. Air dryers or Membrane Dryers are available also.
-
AIRLINE REPLACEMENT / BEARING LAPPING
CMM Technology will gladly quote a complete airline change for your CMM. Brittleness from age, oil, dirt, water and kinking may result in the need for a partial or complete airline replacement. Below is a list of available airline sizes for most CMMs and you may want to buy a small quantity for simple patching.
Many airlines are weaved throughout the CMM frame to the bearings and these bearings may need to be moved or removed to complete this work. Only a certified CMM repair company should attempt to replace these small lines throughout the CMM. In some cases we may require a service call prior to quoting an airline change if we feel the air bearings may be clogged or damaged.
Complete airline changes will require a re-calibration of your CMM which is our main service provided. It is very possible you may make a standard calibration very difficult and more costly by attempting to replace the airlines yourself. We use Flexible Clear Polyurethane Tubing for all airline replacements. If kept clean and dry these should last throughout the life of the CMM.
English Sizes OD ID 1/ 8″ x 5/64″ 5/32″ x 3/32″ 3/16″ x 1/8″ 3/8″ x 1/4″ Metric Sizes OD ID 4mm x 2.5mm 5mm x 3mm 6mm x 4mm 8mm x 5mm
- Call Us Toll-Free: (800) 648-6944
Copyright © 2022 CMM Technology, All Rights Reserved - Powered By Stark Logic.
Terms of Use
|
Privacy Policy