Origin Sphere Risers & Bases

The Following base and extensions can be used with any fixed origin sphere or ball that has an M10 External threaded mount.

Each base will have an internal thread mount for the probe and for the table or surface in which to mount these items.

Specials can be quoted, expect over 6 weeks for delivery on specials.

PRODUCTS – CALL FOR MORE INFO AND PRICING

The Following base and extensions can be used with any fixed origin sphere or ball that has an M10 External threaded mount.

Each base will have an internal thread mount for the probe and for the table or surface in which to mount these items.

Specials can be quoted, expect over 6 weeks for delivery on specials.

2″ Mounting Block

M10 x 1.5 Mounting holes centered on each side for Mounting up to 5 origin spheres. Screws not included.

Part NumberDimensionsPrice
MBK-22" x 2" x 2"$222

45 Degree Block

This block provided mounting vertically and at 45 degress with M10 x1.5 threads. A counterbored hole allows for affixing with a 3/8″ or M10 Socket Head cap screw.

Part NumberDimensionsPrice
MBK-453.5" x 1.5" x 1.5"$222

Origin Sphere Extensions

Cylindrical extension allow you to raise a standard Origin sphere height by 2,3 and 6 inches. Includes 1 M10 x M10 Screw B Extensions are specifically for the DS-200 2″ Diameter Sphere.

Part NumberDimensionsPrice
OSE -21-1/4" Diam x 2"$90
OSE-31-1/4" Diam x 3"$99
OSE-61-1/4" Diam x 6"$105
BOSE -32" Diam x 3"$99
BOSE-62" Diam x 3"$105

Universal Disk Platform

This 4″ Base mounts securely to the work surface with Socket Screw and has threaded hole in the center for mounting an Origin Sphere It also has three 1/4″ – holes counterbored from the bottom to be able to create a 3 ball kinemetric platform using 3/4 ball bar spheres

Part NumberDimensionsPrice
UDP -44" Diam x 1-1/2"$243

Magnetic Disk Platform

4″ Base for holding Target Sphere for CNC- Machining Centers. This 5 Lb base uses rare earth Magnets to create 100 Lbs holding force. Machinable surface has M10 Threaded center hole and 1 more near the outer edge

Part NumberDimensionsPrice
MDP -44" Diam x 1-1/2"$478

Origin Sphere Knuckle

The Knuckle is for mounting an origin Sphere in 2 orientations. It is a sphere with a thorugh hole for M10 or 3/8 Socket Screw. A flat with M10 threaded hole at 90 degrees and at 45 degrees.
See Example

Part NumberDimensionsPrice
KNK-2
(Knuckle Only )
2.5" Diameter$165

Double Sided Mounting Screws

For Use with Fixed Origin Spheres and Bases that have M10 x 1.5
Internal Threads. Standard Origin Sphere pricing includes 1 screw.

Part NumberDimensionsPrice
AS - 10 - 8A =M10x1.5 B =M8x1.25$30
AS - 10 - 10A =M10x1.5 B =M10x1.5$30
AS - 10 - 12A =M10x1.5 B =M12x1.75$30
AS - 10 - 250A =M10x1.5 B =1/4-20"$30
AS - 10 - 312A =M10x1.5 B =5/16-18"$30
AS - 10 - 375A =M10x1.5 B =3/8-16"$30
AS - 10 - 500A =M10x1.5 B =1/2-13"$30