RENISHAW MIH Indexable Head w/DRO

Indexable probe head, in two axes, with programmable digital readout. The MIH can record up to 19 head moves without having to redatum the probe.

A-1070-0003

  • New at $6,550
  • Used/Certified at $3,850 (when available)

 

Compare
Category:

Indexable probe head, in two axes, with programmable digital readout. The MIH can record up to 19 head moves without having to redatum the probe. A-1070-0003 New at $6,550 and Used/Certified at $3,850 (when available)

Now you can give your manual CMM the power and versatility of a motorized probe head. The Renishaw Manual Indexable Head (MIH) is fully adjustable with 720 head positions (same as the motorized PH9) over two axes. All you have to do is unlock the head and move the probe to the position you want. A LCD digital readout shows the probes exact position and, because of high repeatability, you do not have to requalify the probe after moving it! You can program the MIH to memorize up to 19 head positions in order. Direction arrows on the DRO guide you to the next head position. Complex measurement routines can now be programmed on your manual CMM.

The MIH is designed for use with the Autojoint TP6A touch probe which recesses into the MIH’s body saving precious Z travel. TP2, TP20 and TP6 probes can be used with the PAA1 adaptor. The MIH also makes the ideal back-up to PH9/PH10 systems. The MIH has a 5 Pin DIN connector. (Probe cable not included).

MIH Probe Head with S10 joint key, user manual and shank (please specify).

EASY RETROFIT!

Designed to use existing touch probe interfaces, the MIH is simple to install. No special software, cabling or training is required

INCREASED SPEED.

Repeatable Indexing operation allows for pre-qualification of the Probe Tip positions needed for the whole day’s inspection. Adding a TP20 Touch probe with quick change modules adds the capability qualifying different tip sizes also for quick stylus changing.

MIH (Manual Indexable Head) SPECIFICATIONS:

A manually indexable head, repeatable in 720 positions over two axes with LCD display. The MIH is designed for use with the autojoint TP6A tough probe and long extensions for large components.

  • 2(sigma) Positional Repeatability: 1 micron
  • Probe Status Indication: 1 LED
  • Cable Connection: 5pin DIN 180 degree socket
  • A Axis Indexing: 105 degrees-0 degrees in 7.5 degree steps=15 positions
  • B Axis Indexing: +/- 180 degrees in 7.5 degree steps = 48 positions
  • Probe Mounting: Autojoint
  • Mounting Options: Shank to suit your CMM

(Shown with probe and stylus-not included)