MS15 Probe Head Shank
$145.00
For TP1, MIP, MH8, PH5, PH9, PH10 and
PH6M Probe Heads. Fits C.E. Johannson
(new specification) CMM’s.
M-1041-2153
Related Products
-
MS10 Probe Head Shank
$145.00 -
TP20 Probe with Quickchange Modules
TP20 – THE NEW MODULE CHANGING TOUCH TRIGGER PROBE
One of the most common sources of error on standard design touch probes is when using long styli. That requires a manual adjustment of the probe’s triggering force to compensate for the leverage of the stylus. Often the trigger force is not adjusted at all, or is not reduced when a shorter stylus is remounted. The TP20 provides three quick-change stylus modules, preset with trigger forces required for 10mm, 25mm and 50mm long styli.
TP20 is a new kinematic touch trigger probe that gives its users the ability to change stylus configurations, either manually or automatically without requalifying. A direct replacement for the industry standard TP2, the TP20 system is easily retrofitted to both manual and DCC co-ordinate measuring machines (CMMs) with existing TP2 or TP6 installations.
The TP20 probe consists of two parts – a probe body and a detachable probe module that contains the kinematic touch sensor and carries the stylus assembly. The module is connected to the probe body by a highly repeatable magnetic coupling, which allows the exchange of modules without the need to requalify. The probe body has a standard M8 screw connector, which enables simple fitment to all CMMs with a Renishaw M8 probe head, including PH6, MH8 and PH9. Fitment to ‘autojoint’ probe heads is also possible with a suitable Renishaw ‘PAA’ adaptor.
The new optional MCR20 Module Change Rack, stores up to 6 probe modules, enabling automatic changing of different stylus configurations under measurement program control. Probe triggers are inhibited during module changing by a proximity switch system, which eliminates the need for an electrical connection to the MCR20.
The TP20 system extends the availability of fast stylus changing to users of manual CMMs and, with software available from suppliers of CMMs, facilitates automatic changing in most current TP2 or TP6 applications on automated machines.
Sense Directions: 5 Way +/-X, +/-Y, +Z
Mounting Options: M8 Thread
Stylus Thread Size: M2
Suitable Interfaces: PI4, PI4-2, PI6, PI7, PI200Standard Medium Extended
———————————————————————————————————- Unidirectional Repeatability 2(sigma): 0.35 0.50 0.65
- 2D Form Measurement Deviation: +/-0.8 +/-1.0 +/-2.0
- Test Conditions: Steel 10mm long, 4mm ball stylus. Trigger speed 8mm/s
- Trigger Force (XY): 8g 10g 10g
- Nominal at Stylus Tip (Z): 75g 190g 320g
- Overtravel Force (XY): 20-30g 20-40g 20-50g
- Maximum at Stylus Tip (Z): 350g 700g 1000g
- Overtravel (XY): +/-14 degrees +/-14 degrees +/-14 degrees
- Displacement (Z): 4.0mm 3.7mm 2.4mm
-
TP6A Autojoint Touch Probe
$3,595.00TP6 combines the robust characteristics of the TP1 (S) with the flexibility of the TP2. It can be used on manual or DCC CMM’s along with Renishaw’s vast range of heads and extensions.
TP6A incorporates an autojoint for use with the Renishaw Autochange System, or for manual probe change. The TP6A allows for fast probe exchange without redatuming.
- Sense Directions: +/- X,Y,+Z
- 2(sigma) Uni-Directional Repeatability: 0.35 microns
- Pre_Travel Variations: +/- .60 microns
- Stylus Force Range: 10-30g
- Stylus Overtravel: XY Plane +/- 22 degrees
- + Z Axis 6.5 mm @12g
- 3.0 mm @ 30g
- Max.Extensions on: PH9 with TP6 100mm
- PH9A with TP6A 50mm
- PH10M with TP6 200mm
- PH10M with TP6A 200mm
- Suitable Interfaces: PI4, PI7, PI9
- Stylus Thread Size: M3
- Test Stylus Thread Size: 21mm
- Mounting Options: (TP6) M8 thread
- (TP6A) Autojoint
- Test Conditions: 21mm stylus @ 8mm/s with trigger force of 11-13g
-
MS5 Probe Head Shank
$145.00