• PH10TMotorized Probe Head

    $18,551.00

    The PH10T motorized probe head allows complete, rapid, and repeatable inspection of most complex components with minimum human intervention. Full orientation of your TP2 or TP6 probe between any of 720 positions, under manual or program control, turns your 3-axis CMM into a 5-axis machine.

    • 2(sigma) Positional Repeatability: 0.5 microns
    • Cycle Time (90 degree move): 3.5 seconds
    • Total Angular Movement
    • A Axis 105 degrees-0 degrees in 7.5 degree steps=15 positions
    • B Axis +/- 180 degrees in 7.5 degree steps=48 positions
    • Total Number of Positions: 720
    • Maximum Extension Bar Length: 300 mm using PEL4 extension
    • Head Mounting: Shank to suit your CMM
    • Probe Mounting Facility: M8 thread
    • Probe Head Control: PHC10-2 (purchase separately)
  • PH10M Motorized Probe Head

    $21,039.00

    SPECIFICATIONS:

    • 2(sigma) Positional Repeatability: 0.5 microns
    • Cycle Time (90 degree move): 3.5 seconds
    • Total Angular Movement:
    • A Axis 105 degrees-0 degrees in 7.5 degree steps = 15 positions
    • B Axis +/- 180 degrees in 7.5 degree steps = 48 positions
    • Total Number of Positions: 720
    • Maximum Extension Bar Length: 300 mm using PAA3 extension
    • Head Mounting: Shank to suit you CMM
    • Probe Mounting Facility: Autojoint
    • Probe Head Control: PHC10-2

    (Shown with AM1, PAA1 adaptor, TP2 probe and Stylus – Not Included)